Inter-Tech S-3901 RGB ATX Gaming Case
Inter-Tech S-3901 RGB ATX Gaming Case
€101.42 Inc.VAT
A slightly tinted Tempered Glass side panel and two RGB LED strips, which run over the front panel and the whole top of the case, make the S-3901 the ideal candidate for a high-end system with elaborate LED lighting. This is not only due to the standard 120mm RGB LED fan, that is installed on the rear panel, but also because of the digital 5V RGB control board, which accommodates up to 7 additional RGB fans, which are managed via the RGB motherboard control header. Space for up to four additional 3-pin fans round off the connection variety of the integrated circuit board.
In the top of the case are, in addition to the LED strips, fixed dust filter inserts and the controls. In addition tot wo USB 2.0 and USB 3.0 ports and HD audio jacks, there is a slider to set the fan speed (Off/Low/High) and a switch for manually switching through the LED effects. Another removable dust filter under the power supply and a variety of ways to lay the cables, complete the offer.
•RGB control board (allows effects like running light or rainbow)
•3pin RGB header connector for digital 5V RGB motherboard control
•Includes two RGB LED strips and a 120mm RGB fan
•Side panel made of Tempered Glass
Description
Form factor ATX, μATX, ITX
Dimensions (h/w/d) 505 x 215 x 455mm
INSTALLATION DIMENSIONS
Height CPU cooler (max.) 175mm
Length graphics card (max.) 275mm
DRIVE BAYS
5.25″ external
3.5″ external
3.5″ internal 2x
2.5″ internal 2x
FRONT CONNECTORS
USB 3.0 2x
USB 2.0 2x
Card Reader
Microphone 1x
Headphones 1x
POWER SUPPLY
ATX-PSU
FAN MOUNTING OPTION
Front 3x 120mm or 2x 140mm (optional)
Rear 1x 120mm (serial, RGB, 6pin connector)
Top 2x 120mm or 2x 140mm (optional)
GUARANTEE / WARRANTY
Warranty 24 months
SCOPE OF DELIVERY & FEATURES
Scope of delivery
Case
Retail packaging
Screw set
Manual (German, English)
Features
Front panel and top with two RGB light strips
Side panel made of Tempered Glass
1x 120mm RGB fan at the rear included
3pin RGB header connector for 5V RGB motherboard control
LED switch to change colour effects
RGB control board for up to 7 additional RGB fans with specific 6pin connector and four 3pin fans
Manual fan control via slider in the top
Two 3.5″ bays below the motherboard carrier with separate airflow
Place for water cooling in sizes of 120mm and 240mm
Power supply adapter in a separate cage in the bottom part
Openings for easy laying of cables
Easy removable dust filter below the power supply
Slot plates screwed and mesh grid
Stands
LOGISTICAL DATA
Shipping Unit 1 Pcs
EU palett 24 Pcs
Weight net = 6.78kgs
gross = 8.04kgs
Item number 88881272
EAN-Code 4260455641371
Additional information
| Weight | 8.04 kg |
|---|
Related products
-
Add to WishlistAdd to Wishlist
-
Add to WishlistAdd to Wishlist
-
Add to WishlistAdd to Wishlist
